Replacing The Motor Connector - ABB OmniCore C30 Product Manual

5 Repair

5.3.2 Replacing the motor connector

5.3.2 Replacing the motor connector
Location
The illustration shows the location of the motor connector in the controller.
xx1800000038
Required spare parts
Spare part
Harness Motors power LV 6-axis
Harness Motors power ULV 7-axis
Harness Motors power ULV
Required tools and equipment
Equipment
Standard toolkit
Continues on next page
416
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
38.
Article number
3HAC059527-001
3HAC065688-001
3HAC073522-001
Article number
-
Overview
Note
Harness LV robot power 1,455
mm
Only used for IRB 14050 control-
ler.
Only used for CRB 15000 control-
ler.
Note
Content is defined in section
Standard toolkit for controller on
page 570.
Product manual - OmniCore C30
3HAC060860-001 Revision: P