ABB OmniCore C30 Product Manual page 234

5 Repair
5.2.2 Replacing the axis computer
Continued
Removing the axis computer
1
2
Refitting the axis computer
Refitting the axis computer
1
Refitting the axis computer to the frame
1
Continues on next page
234
Action
Remove the bracket screws.
Remove the axis computer.
Action
Refit the axis computer to the bracket
and secure the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000473
xx1800000474
Note/Illustration
Screws: Torx pan head screw M4x8 (4 pcs)
xx1800000475
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P