ABB OmniCore C30 Product Manual page 181

2
3
4
Refitting the main computer
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.7.5 Installing the fieldbus master and the DeviceNet harness
Action
Press the cover plate into the cabinet,
and lift it out.
Insert the harness into the front panel
from inside of the cabinet and secure the
screws.
Insert the cables into the clips on the
bottom of the cabinet.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Note/Illustration
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000739
xx1900001008
Note/Illustration
Continues on next page
Continued
181