ABB OmniCore C30 Product Manual page 331

3
Refitting the Ethernet extension switch (option)
1
2
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the connected ser-
vices gateway and the upper surface of
the main computer should be zero.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.9 Replacing the main computer
Note/Illustration
xx1800000497
TOP VIEW
Note/Illustration
Location of wrist strap button:
xx2000000532
Continues on next page
5 Repair
Continued
331