Location of FlexPendant connector
The FlexPendant connector is located on the front panel on the controller.
xx1700001061
A
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
Product manual - OmniCore C30
3HAC060860-001 Revision: P
A
FlexPendant connector
1 On the status bar, tap the QuickSet button.
2 Tap the Logout/Restart tab.
3 In the FlexPendant section, tap Detach FlexPendant.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.6 Detaching and attaching a FlexPendant
Continues on next page
Continued
101