ABB OmniCore C30 Product Manual page 138

3 Installation and commissioning
3.7.1 Installing the harness for double SMB
Continued
2
3
Installing the harness for double SMB
1
2
3
Continues on next page
138
Action
Remove the screws on the bracket.
Loosen the screw and disconnect:
• K6.X4, K6.X5 - SMB.
Action
Remove the attachment screws on the
front cover.
Push the harness single SMB into the
cabinet.
Take the harness single SMB out from
the upper side.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000472
Note/Illustration
xx1800000727
Product manual - OmniCore C30
3HAC060860-001 Revision: P