ABB OmniCore C30 Product Manual page 345

Removing the robot signal exchange proxy
1
2
Removing the Ethernet extension switch (option)
1
Removing the connected services gateway
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Pull the cable ties out from the locking
holes.
Remove the screws and lift out the robot
signal exchange proxy.
Note
Avoid colliding with the frame of the
controller.
Action
Carefully pull the side of the Ethernet
extension switch and rotate it tightly to
take it out from the bracket.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.9 Replacing the main computer
Note/Illustration
xx1800000971
xx1800000488
Note/Illustration
xx1800000491
Continues on next page
5 Repair
Continued
345