ABB OmniCore C30 Product Manual page 368

5 Repair
5.2.11 Replacing the power supply
Continued
3
4
Concluding procedure
1
2
Removing the power supply optional
Preparations
1
2
Continues on next page
368
Action
Fit the power supply and fasten it with
screws.
Reconnect and secure:
• T2.X1 - A1.X6
• T2.X2 - K2.X1.
Action
Refit the top cover.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Screws: Torx pan head screw M4x8 (4 pcs)
xx1800000548
Note/Illustration
Refitting the top cover on page
Note/Illustration
Location of wrist strap button:
xx1800000683
Product manual - OmniCore C30
3HAC060860-001 Revision: P
230.