6.2 Troubleshooting fault symptoms
Fault symptoms described in this manual
This manual describes how to troubleshoot the following fault symptoms:
Product manual - OmniCore C30
3HAC060860-001 Revision: P
•
No LEDs are lit on the controller on page 502
•
Start-up failure on page 507
•
Problem releasing the robot brakes on page 512
•
Problem starting or connecting the FlexPendant on page 517
•
Problem using the joystick on page 522
•
Controller fails to start on page 523
•
Reflashing firmware failure on page 524
•
Inconsistent path accuracy on page 525
© Copyright 2019-2022 ABB. All rights reserved.
6 Troubleshooting
6.2 Troubleshooting fault symptoms
Continues on next page
501