Installing The Conveyor Tracking Module - ABB OmniCore C30 Product Manual

3.8.2 Installing the conveyor tracking module

Overview
The CTM-01 uses network communication to share conveyor speed and position
data with one or more robot controllers. It contains a WAN port, which is used to
connect to the robot controllers and two LAN ports that can be used for installation
and service purposes.
xx1800000941
Required parts
Spare part
Conveyor tracker module [3103-1]
CONNECTOR KIT - DSQC2000
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.8.2 Installing the conveyor tracking module
Article number Note
3HNA027579-001 DSQC2000
3HNA029345-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
570.
Continues on next page
195