ABB OmniCore C30 Product Manual page 70

3 Installation and commissioning
3.4.4 Replacing the controller from vertical mounting kit to19" rack mounting kit
Continued
2
3
4
70
Action
Assemble the front and the back mounting
kit.
Place the controller into the 19" cabinet and
fasten it with the screws.
Connect the antenna for Connected Services
Gateway (3G or WiFi).
© Copyright 2019-2022 ABB. All rights reserved.
Information
C A D
xx1700001883
A Front mounting kit
B Back mounting kit
C Torx pan head screw M4x12 (4 pcs)
Tightening torque: 1.7-1.8 Nm
D Torx countersunk screw M4x10 (5
pcs)
Tightening torque: 1.7-1.8 Nm
xx1700001884
Torx pan head screw M6x16 (4 pcs)
Tightening torque: 1.7-1.8 Nm
The antenna is preferably placed on top
of the cabinet.
Note
For best performance in a closed cabinet,
use the option Connected Services
Gateway wired (DSQC1041) with external
Internet gateway.
Product manual - OmniCore C30
3HAC060860-001 Revision: P
B