ABB OmniCore C30 Product Manual page 328

5 Repair
5.2.9 Replacing the main computer
Continued
2
Refitting the main computer by assembly group
Refitting the main computer
1
Continues on next page
328
Action
Remove the main computer.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000542
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P