ABB OmniCore C30 Product Manual page 139

4
Refitting the axis computer to the frame
1
2
3
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Insert the harness double SMB into the
front panel from inside the cabinet and
secure the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Reconnect and secure the screw:
• K6.X4, K6.X5 - SMB.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.1 Installing the harness for double SMB
Note/Illustration
Screws: Torx, countersunk screw M4x10 (4
pcs)
xx1800001179
Note/Illustration
Location of wrist strap button:
xx1800000683
Continues on next page
Continued
139