ABB OmniCore C30 Product Manual page 312

5 Repair
5.2.7 Replacing the scalable I/O unit
Continued
5
6
Concluding procedure
1
2
Replacing scalable I/O external units
To replace scalable I/O external units, see Application manual - Scalable I/O, and
Installing scalable I/O external devices on page
312
Action
Push the digital base into the bracket
until you hear a clear clicking sound.
Connect the power cable connector:
• K5.1.X4 - K2.X3
Action
Refit the covers.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000500
Note/Illustration
Refitting the controller covers on page
144.
Product manual - OmniCore C30
3HAC060860-001 Revision: P
227.