ABB OmniCore C30 Product Manual page 301

Removing the small fan
1
2
3
Removing the connected services gateway
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Remove the screws holding the fan.
Push and slide the fan bracket and lift it
out.
Disconnect:
• G2.X1-K2.X17
Action
Disconnect:
i
• K7.X1 - K2.X3
• K7.X2 - A2.X5
Note
The connector K7.X2 is locked;
grab the connector, push it in to
release it and then remove the
connector.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.6 Replacing the connected services gateway
Note/Illustration
xx1800000479
xx1800000480
Note/Illustration
5 Repair
Continued
Continues on next page
301