ABB OmniCore C30 Product Manual page 369

3
Removing the axis computer from the cabinet
1
2
3
Removing the power supply optional
1
2
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Remove the top cover.
Action
Disconnect:
• K6.X11 - A1.X3
• K6.X2 - A2.X9
• K6.X1 - K2.X3.
Remove the screws on the bracket.
Loosen the screw and disconnect:
• K6.X4, K6.X5 - SMB.
Action
Disconnect:
• A1.X7 - T5.X1
Remove the attachment screws and lift
the power supply out.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.11 Replacing the power supply
Note/Illustration
Removing the controller covers on page
Note/Illustration
xx1800000472
Note/Illustration
xx1800000549
Continues on next page
5 Repair
Continued
222.
369