Mounting The Flexpendant Holder - ABB OmniCore C30 Product Manual

3.4.6 Mounting the FlexPendant holder

Required equipment
Equipment
Standard toolkit
FlexPendant Holder w/t E-
stop cover
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Note
To avoid dropping the FlexPendant from height, the holder should be placed in
a comfortable working height.
Always use and store the FlexPendant in such a way that the cable does not
become a tripping hazard.
When not using the device, place it so it does not accidentally fall.
Note
The FlexPendant should always be placed in the holder when it is not used and
it is not allowed to use by unauthorized person.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.6 Mounting the FlexPendant holder
Spare part number
3HAC064927-001
Note
See Standard toolkit for con-
troller on page 570.
Continues on next page
75