ABB OmniCore C30 Product Manual page 158

3 Installation and commissioning
3.7.4 Installing the power supply optional device and the harness 24 V extension
Continued
3
4
Continues on next page
158
Action
Remove the screws holding the process
plate and the screws holding the scalable
I/O bracket.
Pull out the process plate with the as-
sembly from the two guide pins on the
mounting plate.
Note
Avoid colliding with the frame when re-
moving the unit.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
A B
B
xx1800000532
xx1900000215
A Screws holding the scalable I/O
bracket (1 pcs)
B Screws holding the process plate (4
pcs)
Product manual - OmniCore C30
3HAC060860-001 Revision: P
B
B