3 Installation and commissioning
3.7.4 Installing the power supply optional device and the harness 24 V extension
Continued
2
3
Removing the axis computer from the frame
1
2
3
Continues on next page
154
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section
The unit is sensitive to
ESD on page
47.
Remove the top and right covers, and the
front panel of the controller.
Action
Disconnect:
•
A1.X3 - K6.X11
•
K6.X2 - A2.X9
•
K6.X1 - K2.X3.
Remove the screws on the bracket.
Loosen the screw and disconnect:
•
SMB - K6.X4, K6.X5
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx1800000683
Removing the controller covers on page 222
Note/Illustration
xx1900001193
Product manual - OmniCore C30
3HAC060860-001 Revision: P