Mounting The Controller With Desktop Mounting Kit [3001-2] - ABB OmniCore C30 Product Manual

3.4.5 Mounting the controller with desktop mounting kit [3001-2]

General
The OmniCore C30 controller is designed to fit as a desk version, that can have a
desktop mounting kit.
xx1700001887
Required equipment
Equipment
Mounting kit
Standard toolkit
Procedure
Use this procedure to install the desktop mounting kit on the controller.
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.4.5 Mounting the controller with desktop mounting kit [3001-2]
Note
If the desktop mounting kit is mounted to the controller, do not hold the TPU
connector (X4) during any moving or transporting of the controller.
Action
Remove the top cover from the controller.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Information
3HAC063919-001
See Standard toolkit for controller on
page 570.
Info/illustration
xx1700000735
Continues on next page
71