ABB OmniCore C30 Product Manual page 305

3
4
i
Refitting the small fan
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the connected ser-
vices gateway and the upper surface of
the main computer should be zero.
Reconnect:
i
• K7.X1 - K2.X3
• K7.X2 - A2.X5
For connected services gateway wired, there is no power cable.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.6 Replacing the connected services gateway
Note/Illustration
xx1800000496
xx1800000497
TOP VIEW
Note/Illustration
5 Repair
Continued
Continues on next page
305