Configure Configuration Control Without Empty Slots - Siemens SIMATIC ET 200MP Manual

Error messages
The following error messages are returned if an error occurs during reading of the feedback
data record:
Table 4- 7
Error code
80B1
80B5
80B8
4.3.3

Configure configuration control without empty slots

Principle of operation
The modules actually not required do not exist. The configuration is pushed together to the
left in the direction of IM 155-5 PN ST.
Figure 4-1
IM 155-5 PN ST interface module (6ES7155-5AA00-0AB0)
Manual, 08/2013, A5E03612323-02
Error messages
H
H
H
Configure configuration control without empty slots
4.3 Configuration control (option handling)
Meaning
Invalid length
Configuration control not configured
Parameter error
Parameter
25