Code Carrier Connection (Only 840D Sl); Overview - Siemens SINUMERIK 840D sl Turning Operating Manual

Tool management
13.5 Tool list
Hiding magazines
The magazine selection behavior with multiple magazines can be configured in different ways.
References
For a description of configuration options, refer to the
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
13.5.8

Code carrier connection (only 840D sl)

13.5.8.1

Overview

You have the option of configuring a code carrier connection.
This means that the following functions are available in SINUMERIK Operate:
● Creating a new tool from code carrier
● Unloading tools on code carrier
Further information
Further information about tool management with code carrier and the configuration of the user
interface in SINUMERIK Operate can be found at:
● Function Manual SINUMERIK Integrate for Production AMB, AMC AMM/E
● SINUMERIK Operate Commissioning Manual
● Function Manual for tools
738
Deactivate the checkbox next to the magazines that you do not want to
appear in the magazine list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Software option
In order to use the functions, you require the option "Tool Ident Connection".
Operating Manual, 06/2019, A5E44903486B AB
Turning