Commissioning With Android; Installing The "Sidrive Iq Config" Application; Establishing The Connection To The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning
6.2 Commissioning with Android
6.2

Commissioning with Android

6.2.1

Installing the "SIDRIVE IQ Config" application

1. Open the Google Play Store.
id=com.siemens.configapp)
2. Install the Siemens "SIDRIVE IQ Config" application.
After the first start of the application, the terms of use are displayed once. Take note of them
and click "Accept" to confirm.
The "SIDRIVE IQ Config" application requires the following access authorizations:
– Bluetooth interface
– Localization data (to determine the asset location)
– Camera (to scan the motor data matrix code)
– Memory (to update the firmware of the connectivity module (Page 130))
SIDRIVE IQ Config is available in German, English, French, Italian, Spanish, Turkish and Czech.
The language is automatically preset depending on the system language of your mobile
device. A Chinese version is available for use in China.
6.2.2

Establishing the connection to the connectivity module

Start the "SIDRIVE IQ Config" application on your mobile device. The application automatically
activates the Bluetooth interface of your mobile device, and shows active connectivity modules
in a range of approximately 10 m. The BLE name (=Bluetooth name of the device) set in the
factory is "SC400". You can change the name at a later point in time.
Use the "Identify" function to check that you are connected with the required connectivity
module (Page 114).
38
Note: not available in every country
(https://play.google.com/store/apps/details?
Operating Instructions, 04/2023, A5E50161952B AL
SIMOTICS CONNECT 400