Show Running-Config Pim; Ipv6 Pim-Sparse Mode Commands; Ipv6 Pim Bsr-Border - Dell Force10 S4810P Reference Manual
Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Configuration manual (1144 pages)
Table of Contents
Advertisement
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
10.211.1.2
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
10.211.1.2
show running-config pim
Display the current configuration of PIM-SM snooping.
E-Series ExaScale, S4810
Syntax
show running-config pim
Command Modes
EXEC Privilege
Command History
Version 8.3.12.0
Version 8.4.1.0
Example
FTOS#show running-config pim
!
ip pim snooping enable
Related
ip pim snooping
Commands
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
ipv6 pim bsr-border
Invoke IPv6 PIM debugging.
E-Series, S4810
Syntax
debug ipv6 pim [bsr | events | group group | packet | register
[group] | state | | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim command.
GigabitEthernet 8/0
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
Introduced on the S4810.
Introduced on the E-Series ExaScale.
– enables PIM-SM snooping.
1257
Advertisement
Table of Contents
