Show Running-Config Pim - Dell S4810 Reference Manual

10.211.1.2
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
10.211.1.2
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
10.211.1.2

show running-config pim

Display the current configuration of PIM-SM snooping.
S4810
Syntax
show running-config pim
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.4.1.0
Example
Dell#show running-config pim
!
ip pim snooping enable
1308
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
PIM-Sparse Mode (PIM-SM)