Ip Vrf Forwarding - Dell S6100 Configuration Manual

Parameters
string
Defaults None.
Command Modes VRF MODE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.0)
9.4.(0.0)

ip vrf forwarding

Attach an interface to a VRF.
Syntax ip vrf forwarding {vrf-name | management}
To delete an interface associated with a configured VRF, use the no ip vrf forwarding {vrf-name |
management} command.
Parameters
vrf-name
management
Defaults none
Command Modes INTERFACE-CONFIG
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
Enter a descriptive name for the VRF.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S-Series.
Enter name of the VRF that you want to associate the interface to.
Enter the keyword management to associate an interface to the management VRF.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON and Z9500.
Introduced on the S-Series and Z9000.
Virtual Routing and Forwarding (VRF) 1651