Show Vxlan Vxlan-Instance Logical Network - Dell S6100 Configuration Manual

Local vtep ip
Port List
Dell#show vxlan vxlan-instance 1
Instance
Admin State
Management IP
Gateway IP
MAX Backoff
Controller 1
Fail Mode
Port List
Fo 1/4/1
Related Commands vxlan-instance- Enable VXLAN Instance configuration on the platform.

show vxlan vxlan-instance logical network

Displays logical network information related to Network Virtualization Overlay (NVO) Gateway.
Syntax show vxlan vxlan-instance instance ID logical-network [name name]
Parameters
instance ID
name name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Example
Dell#show vxlan vxlan-instance 1 logical-network name LN-1
Name
Description
Type
Tunnel Key
VFI
Unknown Multicast MAC Tunnels:
: 101.101.101.101
: Fo 0/116
: 1
: enabled
: 192.168.200.200
: 3.3.3.3
: 30000
: 192.168.122.6:6632 ssl (connected)
: secure
:
Te 1/1/1/1
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
(OPTIONAL) Enter the keyword name and enter the name of VXLAN logical network up
to a length of maximum 30 characters.
EXEC
EXEC Privilege
Description
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
: LN-1
:
: ELAN
: 1
: 28674
2.2.2.2 : vxlan_over_ipv4 (up)
Te 1/1/2/1 Po 2
Virtual Extensible LAN (VXLAN) 1701