Show Cam Pbr - Dell S4810 Reference Manual

source port
destination-
port
source-port-
range
destination-
port-range
Defaults none
Command REDIRECT-LIST
Modes
Command
Version 9.4.0.0
History

show cam pbr

Display the PBR CAM content.
S4810
Syntax
show cam pbr {[interface interface] | stack—unit slot-number
port-set number]} [summary]
Parameters
interface
interface
stack–unit
number
port-set
number
summary
Defaults none
Command EXEC
Modes
1278
• range = inclusive range of ports (you must specify two
ports for the port command parameter.)
Enter the keywords source-port then the port number to
be matched in the ACL rule in the ICAP rule
Enter the keywords destination-port then the port
number to be matched in the ACL rule in the ICAP rule.
Enter the keywords Source-port-range then the range of
the start port to end port to be matched in the ACL rule in
the ICAP rule.
Enter the keywords destination-port-range then the
range of the start port to end port to be matched in the ACL
rule in the ICAP rule.
Introduced on the S4810.
Enter the keyword interface then the name of the
interface.
Enter the keyword stack-unit then the slot number. The
range is from 0 to 11 .
Enter the keywords port-set then the port-pipe number.
The range is from 0 to 1.
Enter the keyword summary to view only the total number of
CAM entries.
Policy-based Routing (PBR)