Show Cam Pbr - Dell Z9500 Command Reference Manual

show cam pbr

Display the PBR CAM content.
Z9500
Syntax
show cam pbr {[interface interface] | linecard slot-number
port-set number]} [summary]
Parameters
interface
interface
linecard
number
port-set
number
summary
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.4(0.0)
7.4.1.0
Usage The show cam pbr command displays the PBR CAM content.
Information
Example
Dell#show cam pbr linecard 0 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam
Next-hop
Index
---------------------------------------------------------------
--------------
00000 1
0.0.0.0/0
00000 1
0.0.0.0/0
1432
Enter the keyword interface then the name of the
interface.
Enter the keyword linecard then the slot number. The
range is from 0 to 2 .
Enter the keywords port-set then the port-pipe number.
The port-pipe number is from 0 to 3.
Enter the keyword summary to view only the total number of
CAM entries.
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, and Z9000.
Introduced.
Port VlanID Proto Tcp
Egress
Flag Port Port MAC
100 IP
100 IP
Src Dst
Port
0x0 0 0
00:00:00:ab:9c:ed Vl 1001(0/2)
0x0 0 0
00:00:04:b7:14:24 Vl 1002(0/2)
SrcIp DstIp
0.0.0.0/0
0.0.0.0/0
Policy-based Routing (PBR)