Proxy-Gateway Static - Dell S6100 Configuration Manual

3
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway lldp
Dell(conf-vlt-domain)#

proxy-gateway static

Enables the proxy-gateway feature using static configurations.
Syntax [no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
Usage Information
When you add a proxy-gateway static configuration, the setting is saved in the Layer 2 module. When you remove
the static proxy gateway configuration, each proxy-gateway static MAC configured is deleted from the Layer 2
module.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway static
Dell(conf-vlt-domain)#
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
Syntax [no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
The proxy-gateway LLDP configuration is applied.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S6000, Z9000.
Specify the mac-addresses of the VLT peers which are in the remote VLT domain.
VLT Proxy Gateway 1663