Remote-Vtep-Ip - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Usage Information The retry interval value caps at the value configured on the max-backoff.
Related Commands vxlan-instance

remote-vtep-ip

Create a remote VTEP and associate it to specified VNIDs.
Syntax remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the no remote—vtep—ip command.
Parameters
IP Address
vni-profile
Defaults None.
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
Usage Information Use this command to associate a specific VNID to a remote VTEP. Provide a valid profile name while associating to
the remote VTEP.
vnid
Associate a range of VNID numbers to a specific VNI profile.
Syntax vnid VNID-Range
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
— Enable VXLAN Instance configuration on the platform.
Enter the IP Address of the remote VTEP.
Enter the keyword vni-profile followed by the profile name to which the remote
VTEP has to be associated.
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses configured in the
switch.
Virtual Extensible LAN (VXLAN) 1695