Fail-Mode - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Usage Information You must configure feature VXLAN to configure VXLAN-instance.
Related Commands vxlan-instance

fail-mode

Configures failure-mode on the platform.
Syntax fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure
Defaults non secure
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Related Commands vxlan-instance— Enable VXLAN Instance configuration on the platform.
gateway-ip
Configures gateway IP address on the platform.
Syntax gateway-ip IP address
Parameters
IP address
Defaults Disabled
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
— Enable VXLAN Instance configuration on the platform.
Enter the keyword secure to delete all its database and hardware flows/resources,
when the VTEP loses connectivity with the controller.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Enter the IP address of the gateway for the VXLAN instance.
Virtual Extensible LAN (VXLAN) 1693