Installation Procedure; Checking After Installation - Canon imageRUNNER 2530 Service Manual

Installation Procedure

1) Remove the SD Cover.
•
1 Screw

Checking after Installation

1) Turn ON the main power.
2) Check that the AM button is displayed.
MEMO:
If the AM button is displayed, it means that eAM has been recognized. If there is operation failure
with the System Upgrade SD Card, E602 will be displayed.
9
Installation > System Upgrade SD CARD-A1Installation Procedure > Checking after Installation
2) Insert the System Upgrade SD Card.
F-9-89 F-9-89
9 Installation > System Upgrade SD CARD-A1Installation Procedure > Checking after Installation
3) Return the SD Card Cover to its original
position.
F-9-90 F-9-90
T-9-4 T-9-4
9-43
9-43