Agilent Technologies E5071C Manual page 1138

Hide thumbs Also See for E5071C:

Table of Contents

up the code window. The following is the description of the subprograms

associated with the respective buttons.

Procedure called when the user clicks the Copy button on the UserForm

(lines 10 to 520)

Lines 90 to 160

These lines identify the selected items in each list and store them into the

variables TrGet, TrPut, and ActCh.

Lines 180 to 210

If the specified target trace is not displayed, these lines display that trace.

Lines 230 to 250

These lines make active the specified trace (TrGet: source trace) in the

specified channel(ActCh) and hold the sweep.

Reads the number of measurement points for the specified channel (ActCh)

and stores that number into the Nop variable.

Reads the formatted data array for the active trace (source trace) and

store the data into the FmtData variable.

Reads the stimulus array for the specified channel (ActCh) and stores the

data into the Freq variable.

Reads the data format for the active trace (source trace) and store it into

the Fmt variable.

Lines 340 to 350

These lines display the echo window in the lower part of the LCD screen.

Lines 360 to 470

The lines display, in the echo window, each point along with one measured

value (the odd part of the index is always 0) and a frequency if the Fmt is

"MLOG", "PHAS", "GDEL", "MLIN", "SWR", "REAL", "IMAG", or "UPH"; or

Show Quick Links

Table of Contents