Agilent Technologies E5071C Manual page 1190

Measurement Using E5091A (measuring FEM)
Overview
•
Sample Program
•
Other topics about Application Programs
Overview
The apl_fem.vba shows front end module (FEM) measurement as a sample
program of measurement using the E5091A.
If the E5071C does not have 4-port S parameter test set, a
•
runtime error occurs because there are parameters that cannot
be measured.
This VBA program cannot control the E5091A-016, the multiport
•
test set.
Object name
mdlFemMeas
This program calibrates each channel using the ECal module and then
measures the transmission characteristics EGSM:Tx-Antenna (channel 1),
EGSM:Antenna-Rx (channel 2), GSM1800:Tx-Antenna (channel 3), and
GSM1800:Antenna-Rx (channel 4) of the 6-port dual-band FEM as shown
in the below figure.
Module type
Standard module
Programming
Description
Performs
measurement of
FEM
1417