Agilent Technologies E5071C Manual page 1178

Hide thumbs Also See for E5071C:

Table of Contents

Sets channel 1's segment table to the SegmData variable.

Sets channel 1's sweep type to "segment".

Sets the channel 1 graph's horizontal axis display method to the order

base (the axis on which the measurement point numbers are placed evenly

in the order of measurement).

Procedure: Calib_Solt (lines 1550 to 2420)

See Lines 1200 to 2130 of Calib_Solt.

Procedure: Setup_Limitline (lines 2440 to 3180)

Stores the number of lines (5) in trace 1 limit table into the LimDataS13(0)

Lines 2500 to 2790

Store the settings in trace 1 limit table into the LimDataS13(1) to

LimDataS13(25) variables.

Stores the number of lines (4) in trace 2 limit table into the LimDataS21(0)

Lines 2830 to 3060

Store the settings in trace 2 limit table into the LimDataS21(1) to

LimDataS21(20) variables.

Lines 3080 to 3110

Specify trace 1 as the active trace, store trace 1's limit line into the

LimDataS13 variable, and display it. Then, these lines turn on the limit test

function for trace 1.

Lines 3130 to 3160

Specify trace 2 as the active trace, store trace 2's limit line into the

LimDataS21 variable, and display it. Then, these lines turn on the limit test

function for trace 2.

Procedure: Setup_Register (lines 3200 to 3260)

Lines 3220 to 3230

Show Quick Links

Table of Contents