Dell S6000 Reference Manual page 77

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

bootselector-

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

File Management

Enter the keyword all to change both the bootflash and

bootselector images.

Enter the keyword bootflash-image to change the

bootflash image..

Enter the keyword bootselector-image to upgrade the

BIOS system image.

Enter the keywords 0–5 to upgrade only the mentioned

stack-unit .

Enter the keywords all to upgrade the member stack-units.

Enter the keyword booted to upgrade from the current

image in the S6000.

Enter the keyword ftp to follow it with the location of the

source file in this form: //userid:password@hostip/filepath,

or press Enter to launch a prompt sequence.

Enter the keyword tftp to follow it with the location of the

source file in this form: //hostlocation/filepath, or press

Enter to launch a prompt sequence.

Enter the keyword flash to follow it with the location of the

source file in this form: //filepath, or press Enter to launch a

prompt sequence.

Enter the keyword flash to follow it with the location of the

source file in this form: //filepath, or press Enter to launch a

prompt sequence.

Enter the keywordA to upgrade the bootflash partition A

Enter the keyword B to upgrade the bootflash partition B.

Introduced on the S6000.

Added support for IPv6 for the file-url parameter.

Introduced on the S4820T.

Introduced on the Z9000. Added support for the SSD on the