Show Environment - Dell S6000 Reference Manual

Example
Dell#show debug
Generic IP:
Dell#

show environment

View S-Series and Z-Series system component status (for example, temperature or voltage).
S6000
Syntax
show environment [all | fan | stack-unit unit-id | pem]
Parameters
all
fan
stack-unit unit-
id
pem
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Control and Monitoring
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
Enter the keyword all to view all components.
Enter the keyword fan to view information on the fans. The
output of this command is chassis dependent.
Enter the keyword stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 1.
Enter the keyword pem to view only information on power
entry modules.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
117