Verify - Dell S6000 Reference Manual

Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Usage
You must reload Dell Networking OS after executing this command.
Information
Example
Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#

verify

Validate the software image on the flash drive after the image has been transferred to the system, but
before the image has been installed.
Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5
sha256
flash://
img-file
hash-value
Defaults flash drive
Command EXEC mode
Modes
Command Version 9.5.(0.0)
History
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Usage
You can enter this command in the following ways:
Information
•
•
78
Introduced on the S4810.
Added support for TFTP and SCP.
Introduced on the S-Series.
Enter the md5 keyword to use the MD5 message-digest
algorithm.
Enter the sha256 keyword to use the SHA256 Secure Hash
Algorithm
(Optional). Enter the flash:// keyword. The default is to
use the flash drive. You can just enter the image file name.
Enter the name the Dell Networking software image file to
validate.
(Optional). Enter the relevant hash published on i-Support.
verify md5 flash://img-file
verify md5 flash://img-file <hash-value>
File Management