Common Mac Access List Commands; Clear Counters Mac Access-Group - Dell S6000 Reference Manual

When you use the log option, the CP processor logs details about the packets that
match. Depending on how many packets match the log entry and at what rate, the
CP may become busy as it has to log these packets' details.
If you configure the sequence-number, the sequence-number is used as a tie
breaker for rules with the same order.
Related
deny
Commands
permit

Common MAC Access List Commands

The following commands are available within both MAC ACL modes (Standard and Extended) and do not
have mode-specific options. These commands allow you to clear, display, and assign MAC ACL
configurations.
The S6000 supports both Ingress and Egress MAC ACLs.
The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specified rules in
the acl, the traffic on the interface/ VLAN members or Port-channel members will be permitted or
denied.

clear counters mac access-group

Clear counters for all or a specific MAC ACL.
S6000
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
208
NOTE: When ACL logging and byte counters are configured simultaneously,
byte counters may display an incorrect value. Configure packet counters with
logging instead.
— configures a filter to drop packets.
— configures a filter to forward packets.
(OPTIONAL) Enter the name of a configured MAC access list.
Introduced on the S6000.
Access Control Lists (ACL)