Dell S6000 Reference Manual page 71

Version 9.0.2.0
Version 9.2.
(0.0)
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Version 6.5.4.0
Example
Dell# show running-config
Current Configuration ...
! Version 9-0(2-0)
! Last configuration change at Thu Apr 18 10:18:39 2013 by
admin
! Startup-config last updated at Thu Apr 18 10:18:40 2013 by
admin
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.16.127.35/Dell-
SI-9-0-2-0.bin
boot system stack-unit 0 default system: A:
boot system gateway 10.16.132.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
!
hardware watchdog stack-unit 0
hardware watchdog stack-unit 1
hardware watchdog stack-unit 2
Example
Dell#show running-config status
running-config bytes 10257, checksum 0xFD33339F
startup-config bytes 10257, checksum 0xFD33339F
Usage The status option allows you to display the size and checksum of the running
Information
configuration and the startup configuration.
File Management
Introduced on the S6000.
Added support for the tunnel and EIS interface types.
Added support for the VLT option.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the hardware-monitor option.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded to include the last configuration change, start-up
last updated (date and time), and who made the change.
Added the status option.
71