Fsck Flash - Dell S6000 Reference Manual

Related
copy
Commands
the terminal.
show file-systems

fsck flash

Checks the flash file system for errors.
S6000
Syntax
fsck flash:
fsck usbflash:
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.1(0.0)
Version
8.3.19.0
Usage Include the colon (:) when entering this command. This command checks the
Information specified flash memory for errors. If errors are found, the command recommends
that you format the flash.
File Management
CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the write memory command or
copy run start command).
– copies the current configuration to either the startup-configuration file or
– displays information about the file systems on the system.
Introduced on the S6000.
Introduced on S4810 and Z9000.
Introduced on S4820T.
CAUTION: If you elect to format the flash, all files – including the startup
configuration file – are lost. If you do decide to format the specified flash,
consider saving the running configuration as the startup configuration after
formatting the flash (use the write memory command or copy run start
command).
61