show processes memory (S-Series)
processes running in an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
S6000
Syntax
show processes ipc flow-control [cp]
Syntax
show processes ipc flow-control [cp | rp1 | rp2 | stack-unit]
Parameters
cp
Parameters
cp
rp1
rp2
stack-unit
Defaults
none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
126
(OPTIONAL) Enter the keyword cp to view the control
processor's SWPQ statistics.
(OPTIONAL) Enter the keyword cp to view the control
processor's SWPQ statistics.
(OPTIONAL) Enter the keyword rp1 to view the Control
Processor's SWPQ statistics on Route Processor 1.*
(OPTIONAL) Enter the keyword rp2 to view the Control
Processor's SWPQ statistics on Route Processor 2.*
(OPTIONAL) Enter the keyword stack-unit followed by the
stack-unit number to view the Control Processor's SWPQ
statistics on the specified stack-unit.*
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
— displays CPU usage information based on
Control and Monitoring