Show Memory - Dell S6000 Reference Manual

APF11200012UR1
APF12300017GEY
APF12300017GEY
APF12300017GEY
Related
•
Commands
•

show memory

View current memory usage on the switch.
S6000
Syntax
show memory [stack-unit id]
Parameters
stack-unit id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Control and Monitoring
0 7 QSFP
0 8 QSFP
0 9 QSFP
0 10 QSFP
show interfaces — displays the interface configuration.
show interfaces transceiver
of an installed transceiver. The output also displays the transceiver's serial
number.
(OPTIONAL) Enter the keyword stack-unit then the stack
unit ID of the S-Series stack member to display memory
information on the designated stack member. The unit ID
range from 0 to 11.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced this version of the command for the S-Series.
40GBASE-CR4-1M
Yes
40GBASE-CR4-1M
Yes
40GBASE-CR4-1M
Yes
40GBASE-CR4-1M
Yes
— displays the physical status and operational status
121