Dot1X Reauth-Max - Dell S6000 Reference Manual

Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.6.1.0
Version 7.4.1.0

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes
unauthorized.
S6000
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number
Defaults 2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.6.1.0
802.1X
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the permitted number of re-authentications. The range
is from 1 to 10. The default is 2.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
161