Show Dot1X Interface - Dell S6000 Reference Manual

Dell#show dot1x cos-mapping int g 2/21 mac-address
00:00:01:00:07:00
802.1p CoS re-map table on Gi 2/21:
----------------------------------
802.1p CoS re-map table for Supplicant: 00:00:01:00:07:00
Dot1
0
1
2
3
4
5
6
7

show dot1x interface

Display the 802.1X configuration of an interface.
S6000
Syntax
show dot1x interface interface [mac-address mac-address]
Parameters
interface
mac-address
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
166
Remapped Dot1p
7
6
5
4
3
2
1
0
Enter one of the following keywords and slot/port or number
information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/port information.
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
(Optional) MAC address of a supplicant.
EXEC
EXEC privilege
Introduced on the S6000.
Introduced on the Z9000.
802.1X