Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable Telnet and configure a port number:
Zxxx0:admin#enable telnet 23
Command: enable telnet 23
Success.
Zxxx0:admin#
5.17. disable telnet
Description
This command is used to disable Telnet.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable Telnet:
Zxxx0:admin#disable telnet
Command: disable telnet
Success.
Zxxx0:admin#
5.18. save
Description
This command is used to save the current configuration or log in non-volatile RAM.
5. Basic Management Commands
45