Telnet Configuration - Panasonic PN28080K Operation Manual

3.5.2. Telnet Configuration

Configure the telnet-related settings in "Global configuration mode."
Confirm the configuration information by executing the "show telnet-sever"
command in "Privileged mode."
Command to show the telnet server configuration
M24eG#
Command to enable the telnet server
M24eG(config)#
Command to disable the telnet server
M24eG(config)#
Command to set the telnet server timeout
M24eG(config)#
Command to enable the telnet access limitation
M24eG(config)#
Command to disable the telnet access limitation
M24eG(config)#
Command to set the device to allow telnet access
M24eG(config)#
show telnet-server
telnet-server enable
no telnet-server enable
telnet-server inactivity-timer <minutes>
telnet-server [ipv6] access-limitation enable
no telnet-server [ipv6] access-limitation enable
telnet-server <entry> {<ip-address> <mask> | ipv6 <ipv6-address>
prefixlen <prefixlen>}
105