Telnet Access Limit - Panasonic PN28080K-ID Operation Manual

3.1.15. Telnet Access Limit

Select "Basic Config" and "System Security" and then "Telnet Access Limit" to open
the screen shown in Figure 3-15. On this screen, you can configure limitation of
equipment accessing this switch via Telnet.
Screen Description
Telnet Access Displays the IPv4 Telnet access limit.
Limitation "Disable" is the factory default setting.
Enable
Disable
IPv6 Displays the IPv6 Telnet access limit.
Telnet Access "Disable" is the factory default setting.
Limitation
Enable
Disable
Number This is the entry number for the Telnet access limit.
IP Address Displays the information on accessible IPv4 networks to be added.
/Subnet Mask There is no factory default setting. "0" is displayed for all of IPv4 Addresses and
Subnet Masks.
IPv6 Address Displays the information on accessible IPv6 networks to be added.
/Prefix Length There is no factory default setting. "::" is displayed for all of IPv6 Addresses and
Subnet Masks.
Figure 3-15 Telnet Access Limit
Enables the Telnet access limitation.
Disables the Telnet access limitation.
Enables the Telnet access limitation.
Disables the Telnet access limitation.
38